Perfect for all those hard-to-reach places!
Now you can easily flush out salt, sand & mud build up + it allows you to use Salt Exterminator 4WD Wash inside your chassis rails! Considerably more economical than other section chassis rail cleaning products on the market! We've kept our Chassis Wand simple, effective & most importantly, affordable!
Our Chassis Wand is 300mm long and made from 3/8th nylon line. With our unique perforated 360° end, it can get into those hard-to-get-at places that the garden hose or gurney can’t reach – up under coil spring mounts, shock covers, and into small holes in chassis cross rails.
Just connect to the garden hose and watch the magic happen!
Try our NEW super affordable & simple to use Chassis Wand Today!
4WDetail, the pioneers of New-age 4WD Care Technology.
A GAME CHANGING under body protection system
Chassis ProTech is a unique one of a kind Australian made, manufactured and designed unit that was designed after years of experience working on four wheel drives, caravans and boat trailers.
Chassis rails and A-frames of these vehicles are extremely hard to clean out and this can be a very messy and dirty job. You inevitably end up wet and dirty lying on your back on the ground in your driveway.
ENGINEERED & TESTED FOR THE HARSHEST CONDITIONS
No matter what when using the garden hose or applicator to try and replicate this you never manage to reach the top of the chassis rails and hard to get spots.
The Chassis Wand is easy to use within your chassis rail, caravan A-frame or boat trailer chassis. Then it is as simple as plugging in your low-pressure household mains to the fitting.
The Chassis Wand provides pressure to the high pressure nylon line with patented micro perforations that produce a 360° jet that softens and loosens built-up clay, bull dust, salt, sand and works to cause a flowing motion of water that picks these particles up and releases them out of the chassis rail onto the floor.
360°OF COMPLETE INTERNAL CHASSIS RAIL CONTACT
Unsealed roads can be a particular problem too. There is a high content of clays that over many kilometres build up in your chassis rail. These fine particles of dust build up in your chassis rail and when it gets wet and then dries it becomes like wet concrete acting like a hard sponge. This stays wet for very long periods of time causing moisture to sit in the chassis rail, combine this with salts and it’s a perfect blend for accelerated oxidisation which causes rusting. If this is left for years at a time it will become so hard and wet that it’s near impossible to remove without a lot of elbow grease.
Our Chassis Wand is an affordable, time saving rust prevention option. Not just another four-wheel-drive accessory, this is a must have!