Skip to content
OVER 1,400+ ★★★★★ Reviews! Buy in Bulk & SAVE up to 50%!
OVER 1,400+ ★★★★★ Reviews!

Salt Exterminator™ Marine Series PWC & Boat Wash Directions

IMPORTANT: DO NOT allow to dry on surface & DO NOT use in direct sunlight NOR on hot surface. 

HOW TO REMOVE SALT & SAND

  • Ensure your Vessel and Trailer is parked in shade, not in direct sunlight & surface is cool to touch before applying Salt Exterminator Marine Series.

  • Using a 4WDetail Pressure or Garden Snow Foam Cannon, mix a 1:9 dilution ratio with water, into Cannon's Canister. 

  • Snow Foam Entirety of your PWC, Boat and Trailer's topside & underbody with Salt Exterminator Marine Series, ensuring all salt & sand is covered & saturated with Salt Exterminator Marine Series. If road grime is present, Microfibre Noodle Mitt agitation may be required.

  • Let Salt Exterminator foam dwell on surface for 1-3 minutes. DO NOT allow Salt Exterminator Marine Series to dry. 

  • Using pressure washer or garden hose cannon (with canister detached), thoroughly rinse Salt Exterminator Marine Series + Debris off your PWC, Boat and Trailer's topside & underbody, in slow overlapping motions at 30-40cm away from surface. 
  • To make your next clean more efficient, easier & give your PWC, Boat and Trailer that next layer of protection. We recommend to now apply either Salt Seal or Salt Seal PRO and Bead Boss to your PWC or Boat & Chassis Shield or Chassis Shield PRO to your Trailer.  

  • Dry your PWC, Boat and Trailer with the 4WDetail XL Microfibre Drying Towel from top to bottom. DO NOT air dry, as this will results in water marks. 

HOW TO REMOVE MUD & RED DIRT

  • Ensure your Vessel and Trailer is parked in shade, not in direct sunlight & surface is cool to touch before applying Salt Exterminator Marine Series.

  • Using a 4WDetail Pressure Snow Foam Cannon, mix a 1:3 to 1:1 dilution ratio with water, into Cannon's Canister.

  • Snow Foam Entirety of your PWC, Boat and Trailer's topside & underbody with Salt Exterminator Marine Series, ensuring all salt & sand is covered & saturated with Salt Exterminator Marine Series. If road grime is present, Microfibre Noodle Mitt agitation may be required.

  • Let Salt Exterminator Marine Series foam dwell on surface for 2-3 minutes. DO NOT allow Salt Exterminator Marine Series to dry. 

  • Using pressure washer, thoroughly pressure wash off Salt Exterminator Marine Series + Debris, in slow overlapping motions at 40-50cm away from surface. 
  • To make your next clean more efficient, easier & give your PWC, Boat and Trailer that next layer of protection. We recommend to now apply either Salt Seal or Salt Seal PRO and Bead Boss to your PWC or Boat & Chassis Shield or Chassis Shield PRO to your Trailer.  

  • Dry your PWC, Boat and Trailer with the 4WDetail XL Microfibre Drying Towel from top to bottom. DO NOT air dry, as this will results in water marks. 

HOW TO REMOVE ROAD GRIME

  • Ensure your Vessel and Trailer is parked in shade, not in direct sunlight & surface is cool to touch before applying Salt Exterminator Marine Series.

  • Using a 4WDetail Pressure Foam Cannon, mix a 1:9 dilution ratio with water, into Cannon's Canister. 

  • Snow Foam Entirety of your PWC, Boat and Trailer with Salt Exterminator Marine Series, ensuring all road grime & fallout is covered & saturated with Salt Exterminator Marine Series. 

  • Let Salt Exterminator Marine Series foam dwell on surface for 1-3 minutes. DO NOT allow Salt Exterminator Marine Series to dry. 

  • Using pressure washer, thoroughly pressure wash off Salt Exterminator Marine Series + Debris, in slow overlapping motions at 40-50cm away from surface. 
  • Now the large majority of imbedded debris has been lifted off your paint's surface, you can use a 4WDetail Microfibre Noodle Mitt, to remove the deeply imbedded debris (such as road grime).

  • Re-foam your PWC, Boat and Trailer with a 1:9 parts dilution ratio, suds up & saturate your Microfibre Noodle Mitt before contacting paint.

  • From top to bottom, in horizontal movements, wipe over your PWC or Boat with the Microfibre Noodle Mitt. After cleaning each panel, rinse out your mitt and re-suds before contacting your PWC or Boat. 

  • Now thoroughly rinse all Salt Exterminator Marine Series foam from top to bottom off your PWC or Boat, ensuring no residue is left behind. 

  • To make your next clean more efficient, easier & give your PWC, Boat and Trailer that next layer of protection. We recommend to now apply either Salt Seal or Salt Seal PRO and Bead Boss to your PWC or Boat & Chassis Shield or Chassis Shield PRO to your Trailer.  

  • Dry your PWC, Boat and Trailer with the 4WDetail XL Microfibre Drying Towel from top to bottom. DO NOT air dry, as this will results in water marks. 

PRODUCT SUPPORT

NEED A HAND? GIVE US A CALL!

Call one of our friendly experts on 1800 493 382 

Calling hours 9am - 5pm Monday to Friday.


If you have any questions at all, whether it be for shipping, products, adapters or how to use anything on our store, please send us an email to help@4WDetail.com!


Or alternatively send us a message using the button on the bottom right of your screen. Looking forward to hearing from you!

More » Less «
  • List
  • Map