Directions for use:
SHAKE WELL BEFORE USE | USE WITHIN 1-3 DAYS OF SOILING 4WD THOROUGHLY DECONTAMINATE YOUR 4WDS TOPSIDE EXTERIOR WITH SALT EXTERMINATOR™ PRIOR TO USE FOR BEST SALT SEALING RESULTS!
1. Add 50-80ml to 1L to snow foam cannon. Fill the remainder of cannon with water.
NOTE: For stronger dilutions it is not necessary to fill entire cannon with solution. Mixing to a 500ml total solution will allow you to get more washes per Salt Seal™ bottle.
2. Spray entirety of top side exterior with Salt Seal™ to ensure all topside exterior surfaces are sealed against oxidising salts & acidic mud!
3. Let Salt Seal™ bond to your paint, glass, rubbers & plastics for 5-10 minutes, then rinse all coated areas with use of pressure washer, ensuring all excess Salt Seal™ has been removed. DO NOT use in direct sunlight. DO NOT allow Salt Seal™ to dry on surface.
4. Dry off your 4WD with a quality microfibre drying towel to avoid watermarks.
5. Relax, knowing your pride & joy is sealed against corrosive salt & acidic mud!