Chassis Shield™ PRO Series Directions

IMPORTANT: USE BEFORE & AFTER 4WDING | ALLOW UP TO 24 HOURS FOR CHASSIS SHIELD™ TO BOND TO UNDERBODY SURFACES BEFORE DRIVING | TEST IN INCONSPICUOUS AREA FIRST. DO NOT APPLY TO ENGINE, EXHAUST NOR ANY BRAKING COMPONENTS. DO NOT APPLY TO ANY VEHICLE COMPONENTS THAT REACH HIGH TEMPERATURES. ONLY APPLY TO CHASSIS RAILS & AXLES. REMOVE ALL OVERSPRAY FROM THESE COMPONENTS BEFORE DRIVING.

NOTE: SAFE FOR 4WDS WITH OR WITHOUT UNDERBODY CHEMICAL RUST PROOFING OR AFTERMARKET LININGS.

TEST IN INCONSPICUOUS AREA FIRST.

DIRECTIONS:

Decontaminate your 4WD's underbody with Salt Exterminator™, for that seriously stubborn grime & stains. Ensure all sand &/or mud is removed. Allow underbody to then dry before Chassis Shield™ application.
Spray directly onto surface using spray trigger. AVOID overspray onto topside exterior & wheels to limit visible clear residue on these components.
Spray ONLY chassis & axles with Chassis Shield™ to ensure these rust prone surfaces are sealed against oxidising salts & acidic mud!
Leave for a minimum of 24 hours before your next beach or muddy trail trip! DO NOT use or allow to dry in direct sunlight.
To remove Chassis Shield™ overspray from unwanted areas (wheels, paint, mud flaps, etc.), spray Salt Exterminator™ (1:1 dilution) with spray trigger, agitate & then rinse off with a strong stream of water.
Relax, knowing your pride & joy is sealed against corrosive salt & acidic mud for 2 weeks on the beach or trails!

NEED A HAND? GIVE US A CALL!

Call one of our friendly experts on 1800 493 382

Calling hours 9am - 5pm Monday to Friday.

If you have any questions at all, whether it be for shipping, products, adapters or how to use anything on our store, please send us an email to help@4WDetail.com

Or alternatively send us a message using the button on the bottom right of your screen. Looking forward to hearing from you!